{"title":"IceAge Suspension","description":null,"products":[{"product_id":"iceage-2025-front-arm-drop-kit-for-polaris-matryx","title":"Front Arm Drop Kit - 2025+ RMK PRO \u0026 KHAOS","description":"\u003cp\u003e\u003cstrong\u003eThe 2025-current RMK PRO and RMK Khaos sleds are no longer equipped with the pre-punched lower front skid arm drop hole from the factory - we recommend the front arm drop for anyone running our taller ELEVATE spindles on an RMK to balance machine front to rear. This kit allows you do make this key geometry change on your 2025+ Polaris Matryx PRO or KHAOS.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen to run your front arm dropped - our recommendations:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRO RMK: dropped front skid arm recommended on ALL models when installing ELEVATE spindles. Can also be installed without ELEVATE spindles for a more playful feel. Can be switched between factory position and dropped depending on conditions and desired handling.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRMK KHAOS: dropped front skid arm recommended on ALL models when installing ELEVATE spindles. You can install this without ELEVATE spindles as well but steering will be very light on the front end and limit climbing ability. Can be switched between factory position and dropped depending on conditions and desired handling.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e** You still retain full use of your factory upper skid arm hole with this kit, so the geometry change is 100% reversible if you wish to do so, just re-bolt the front skid arm back in the factory hole in the tunnel, which is retained**\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=GxzxyolsvFg\u0026amp;t=182s\"\u003eCLICK HERE FOR INSTALLATION VIDEO HOW-TO\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eOur 2025-current Front Arm Drop Kit for Polaris MATRYX RMK\/KHAOS includes:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCustom 2-positon backer plate (steel) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRivet punch\u003c\/li\u003e\n\u003cli\u003e3\/16\" drill bit for removing \u0026amp; adding new rivet holes\u003c\/li\u003e\n\u003cli\u003eCenter punch for locating drop position\u003c\/li\u003e\n\u003cli\u003e13\/32\" drill bit for new drop position\u003c\/li\u003e\n\u003cli\u003eNew rivets for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSOLD AS A PAIR OF TWO BRACKETS AND HARDWARE - ORDER ONE KIT PER SLED\u003c\/strong\u003e\u003c\/p\u003e","brand":"IceAge Performance","offers":[{"title":"Default Title","offer_id":54766703313180,"sku":"15-460","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2291\/3820\/files\/FrontArmDropKit.png?v=1792884829"},{"product_id":"stryker-arms-axys-react","title":"STRYKER Arms - Polaris 36\" React - Matryx\/Axys","description":"\u003ch2\u003eStryker arms are tailor-made to meet the needs of riders that refuse to compromise.\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePRE-LOADED WITH BALL JOINTS, BUSHINGS, METAL SWAYBAR DROPLINK, AND ALL NECESSARY HARDWARE - BOLT ON READY.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor Polaris 36\" REACT front end equipped mountain sleds (PRO RMK or KHAOS)  2019 to current, or can be adapted to 2016-2018 models with a complete 36\" front end conversion (requires new 36\" front end ski shocks, upper a-arms, and tie rods)\u003c\/p\u003e\n\u003cp\u003eOur high-clearance lower A-arm has been fully engineered and thoroughly tested in the field to give you maximum strength without risking damage to your sled. Our forged aluminum design and precision machined finish allows us to create a part with smooth sculpted edges and increased clearance height across the entire front section, not just the middle like our competitors. This further reduces your chances of snagging and helps you glide over obstacles without getting caught up. To top it off, every set of Stryker arms is anodized black for a sleek and durable finish.\u003c\/p\u003e\n\u003cp\u003eWhen developing our design, we found the OEM Axys React A-Arm to be incredibly light, but prone to bending unnecessarily in many load cases. On the other hand, there are many welded steel aftermarket arms available that move this vital component’s failure point to the tie rod end as a stopgap. However, a failure at this critical control point in your front end can result in instantaneous ski dive, putting your safety at risk. By utilizing FEA load case analysis together with an intensive testing process, we have engineered a stronger a-arm that won't put your safety or your bulkhead at risk, while being comparable in weight to OEM.  \u003c\/p\u003e\n\u003cp\u003eWe utilize OEM-style pivot bushings on the bulkhead and spindle mounts for unmatched consistency and durability.  \u003c\/p\u003e\n\u003cp\u003eEach set comes with bushings - fully assembled - and ready for installation. No messing around with frustrating press-fit components, just quick and easy OEM-like install.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStryker Arms\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered, not fabricated\u003c\/li\u003e\n\u003cli\u003ePrecision fit\/finish\u003c\/li\u003e\n\u003cli\u003eUsable clearance across the whole arm\u003c\/li\u003e\n\u003cli\u003eIncreased strength\u003c\/li\u003e\n\u003cli\u003eComparable weight to OEM\u003c\/li\u003e\n\u003cli\u003eNon-proprietary design for OEM part interchangeability\u003c\/li\u003e\n\u003cli\u003e#mtnproven design - protect your sled and reduce injury risk in extreme cases\u003c\/li\u003e\n\u003cli\u003e100% manufactured and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IceAge Performance","offers":[{"title":"Default Title","offer_id":54766770585884,"sku":"15-326","price":585.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2291\/3820\/files\/STRYKERStacked2.png?v=1792886653"},{"product_id":"elevate-ski-doo-gen4","title":"ELEVATE \/\/ Ski-Doo \u0026 Lynx","description":"\u003cp\u003e\u003cstrong\u003eNOT COMPATIBLE WITH 32\" FRONT END - 34\" and 36\" Summit \u0026amp; Freeride compatible 2017-2027 Gen4 \u0026amp; Gen5\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eTake your riding to the next level with the ELEVATE kit by IceAge Performance. Starting with the already impressive platform of the Ski-Doo\/Lynx chassis, we took years of testing to perfectly hone a spindle \/ suspension setup combination that drastically improves the agility, handling, and deep snow performance by lifting the chassis without any negative side effects. This increase in height allows the sled to glide over the snow with ease and reduces running board and side panel drag, as well as front end predictability. The ELEVATE kit turns your Ski-Doo Gen4 \u0026amp; Gen5 into a machine capable of dominating the gnarliest terrain the mountains can throw at you. The kit includes spindles, and suspension setup guide, and all the hardware necessary to install.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpindle\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBulkhead height and snow clearance increased by 1 inch\u003c\/li\u003e\n\u003cli\u003eReduce offset by 50% to decrease steering effort and reduce \"auto-steer\"\u003c\/li\u003e\n\u003cli\u003eSingle piece billet 6061 T6 aluminum construction for unmatched strength\u003c\/li\u003e\n\u003cli\u003e2 tone machined \/ black anodized finish\u003c\/li\u003e\n\u003cli\u003ePrecise side-hilling in steep terrain\u003c\/li\u003e\n\u003cli\u003eControlled playfulness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u0026gt;PAIRS WELL WITH OUR ADAPT GEOMETRY RAIL SYSTEM for Gen5 Summit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSOLD AS A PAIR OF SPINDLES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eALSO COMPATIBLE WITH 2025+ LYNX BRUTAL 16\" WIDE MODELS (400mm rear track width) - does not work on 20\" wide track models\u003c\/strong\u003e\u003c\/p\u003e","brand":"IceAge Performance","offers":[{"title":"Default Title","offer_id":54766770782492,"sku":"15-350","price":645.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2291\/3820\/files\/BRP_ELEVATE_e6eafb4c-9145-404e-bcba-613da2819ba3.png?v=1792886652"},{"product_id":"arctic-cat-yamaha-stryker-ez-steer-arms-36-front-end","title":"Arctic Cat\/ Yamaha STRYKER \"EZ Steer\" Upper A-Arms - 36\" Front End","description":"\u003cp\u003eA common issue on the Arctic Cat and Yamaha 36\" front end equipped sleds is that the steering requires too much effort, and will tire the rider out quickly. In our pursuit of perfecting the Alpha, Ascender, and Sidewinder chassis, we developed this billet aluminum geometry-altering upper A-arm to solve this handling shortcome. By decreasing the caster angle of the front end, we have significantly reduced  the amount of effort required to make every single move on the mountain. In particular, you will notice the sled is much more eager to pivot and turn back uphill with this setup. Stryker \"EZ Steer\" arms are compatible with ELEVATE spindles AND stock spindles on any 36\" front end equipped cat or Yamaha (36\" front end was factory equipped from MY2016 to present). Together with our ELEVATE spindle, they can perfect the front end of the Arctic Cat \/ Yamaha sleds for deep-snow riding, making the sled feel light, nimble, and easy to manage in technical terrain.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSold as a pair, individual arms are available as a service part if necessary.\u003c\/p\u003e\n\u003cp\u003eThese arms will re-use your factory rod end\/ball joint from original upper A-arm.\u003c\/p\u003e\n\u003cp\u003eStryker \" EZ Steer\" upper A-arms are tailor-made to meet the needs of riders that refuse to compromise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStryker \" EZ Steer \" Arms\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduce steering effort for a lighter feel\u003c\/li\u003e\n\u003cli\u003eCompatible with stock or ELEVATE spindles\u003c\/li\u003e\n\u003cli\u003ePrecision fit\/finish - full billet component\u003c\/li\u003e\n\u003cli\u003eIncreased strength\u003c\/li\u003e\n\u003cli\u003eNon-proprietary design for OEM part interchangeability: all other parts are interchangeable with OEM 36\" front end.\u003c\/li\u003e\n\u003cli\u003e#mtnproven design - protect your sled by using proven performance parts that we run on our own machines.\u003c\/li\u003e\n\u003cli\u003e100% manufactured and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"IceAge Performance","offers":[{"title":"Default Title","offer_id":54766770815260,"sku":"15-400","price":385.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2291\/3820\/files\/EZSteer_2ec91831-d30e-4694-96ed-a38444cfa7fe.png?v=1792886657"},{"product_id":"stryker-ez-steer-arm-replacement","title":"STRYKER \"EZ\" Steer Arm Replacement","description":"\u003cp\u003eSOLD INDIVIDUALLY!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eService kit for the Arctic Cat\/Yamaha EZ Steer upper control arm (36\" front end). \u003c\/p\u003e","brand":"IceAge Performance","offers":[{"title":"Default Title","offer_id":54766823768348,"sku":"15-401","price":192.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2291\/3820\/files\/catupperwhitespace_77f31295-2d6f-42a7-bd97-d988c5840675.png?v=1792889868"},{"product_id":"stryker-arm-left-individual-service-part-clutch-side-polaris-36-react-matryx-axys","title":"STRYKER Arm LEFT individual service part (CLUTCH SIDE) - Polaris 36\" React - Matryx\/Axys","description":"\u003ch2\u003eINDIVIDUAL LEFT SIDE LOWER A-ARM (CLUTCH SIDE) ONLY\u003c\/h2\u003e\n\u003cp\u003eComes pre-populated with new ball joint, pivot bushings, and new drop-link assembly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eDoes not include shock thru-shaft or thru-shaft mounting bolts - these will need to be carried over from your existing arm.\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eStryker arms are tailor-made to meet the needs of riders that refuse to compromise.\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eOur high-clearance lower A-arm has been fully engineered and thoroughly tested in the field to give you maximum strength without risking damage to your sled. Our forged aluminum design and precision machined finish allows us to create a part with smooth sculpted edges and increased clearance height across the entire front section, not just the middle like our competitors. This further reduces your chances of snagging and helps you glide over obstacles without getting caught up. To top it off, every set of Stryker arms is anodized black for a sleek and durable finish.\u003c\/p\u003e\n\u003cp\u003eWhen developing our design, we found the OEM Axys React A-Arm to be incredibly light, but prone to bending unnecessarily in many load cases. On the other hand, there are many welded steel aftermarket arms available that move this vital component’s failure point to the tie rod end as a stopgap. However, a failure at this critical control point in your front end can result in instantaneous ski dive, putting your safety at risk. By utilizing FEA load case analysis together with an intensive testing process, we have engineered a stronger a-arm that won't put your safety or your bulkhead at risk, while being comparable in weight to OEM.  \u003c\/p\u003e\n\u003cp\u003eWe utilize OEM-style pivot bushings on the bulkhead and spindle mounts for unmatched consistency and durability.  \u003c\/p\u003e\n\u003cp\u003eEach set comes with bushings - fully assembled - and ready for installation. No messing around with frustrating press-fit components, just quick and easy OEM-like install.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStryker Arms\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered, not fabricated\u003c\/li\u003e\n\u003cli\u003ePrecision fit\/finish\u003c\/li\u003e\n\u003cli\u003eUsable clearance across the whole arm\u003c\/li\u003e\n\u003cli\u003eIncreased strength\u003c\/li\u003e\n\u003cli\u003eComparable weight to OEM\u003c\/li\u003e\n\u003cli\u003eNon-proprietary design for OEM part interchangeability\u003c\/li\u003e\n\u003cli\u003e#mtnproven design - protect your sled and reduce injury risk in extreme cases\u003c\/li\u003e\n\u003cli\u003e100% manufactured and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IceAge Performance","offers":[{"title":"Default Title","offer_id":54766823801116,"sku":"15-326-L","price":292.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2291\/3820\/files\/STRYKER_ClutchSide.png?v=1792889871"},{"product_id":"copy-of-stryker-arm-right-individual-service-part-exhaust-side-polaris-36-react-matryx-axys","title":"STRYKER Arm RIGHT individual service part EXHAUST SIDE - Polaris 36\" React - Matryx\/Axys","description":"\u003ch2\u003eINDIVIDUAL RIGHT SIDE LOWER A-ARM ONLY - EXHAUST SIDE\u003c\/h2\u003e\n\u003cp\u003eComes pre-populated with new ball joint, pivot bushings, and new drop-link assembly.\u003c\/p\u003e\n\u003ch2\u003eDoes not include shock thru-shaft or thru-shaft mounting bolts - these will need to be carried over from your existing arm.\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eStryker arms are tailor-made to meet the needs of riders that refuse to compromise.\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eOur high-clearance lower A-arm has been fully engineered and thoroughly tested in the field to give you maximum strength without risking damage to your sled. Our forged aluminum design and precision machined finish allows us to create a part with smooth sculpted edges and increased clearance height across the entire front section, not just the middle like our competitors. This further reduces your chances of snagging and helps you glide over obstacles without getting caught up. To top it off, every set of Stryker arms is anodized black for a sleek and durable finish.\u003c\/p\u003e\n\u003cp\u003eWhen developing our design, we found the OEM Axys React A-Arm to be incredibly light, but prone to bending unnecessarily in many load cases. On the other hand, there are many welded steel aftermarket arms available that move this vital component’s failure point to the tie rod end as a stopgap. However, a failure at this critical control point in your front end can result in instantaneous ski dive, putting your safety at risk. By utilizing FEA load case analysis together with an intensive testing process, we have engineered a stronger a-arm that won't put your safety or your bulkhead at risk, while being comparable in weight to OEM.  \u003c\/p\u003e\n\u003cp\u003eWe utilize OEM-style pivot bushings on the bulkhead and spindle mounts for unmatched consistency and durability.  \u003c\/p\u003e\n\u003cp\u003eEach set comes with bushings - fully assembled - and ready for installation. No messing around with frustrating press-fit components, just quick and easy OEM-like install.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStryker Arms\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered, not fabricated\u003c\/li\u003e\n\u003cli\u003ePrecision fit\/finish\u003c\/li\u003e\n\u003cli\u003eUsable clearance across the whole arm\u003c\/li\u003e\n\u003cli\u003eIncreased strength\u003c\/li\u003e\n\u003cli\u003eComparable weight to OEM\u003c\/li\u003e\n\u003cli\u003eNon-proprietary design for OEM part interchangeability\u003c\/li\u003e\n\u003cli\u003e#mtnproven design - protect your sled and reduce injury risk in extreme cases\u003c\/li\u003e\n\u003cli\u003e100% manufactured and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IceAge Performance","offers":[{"title":"Default Title","offer_id":54766823833884,"sku":"15-326-R","price":292.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2291\/3820\/files\/STRYKER_exhaustside.png?v=1792889871"},{"product_id":"arctic-cat-catalyst-elevate","title":"ELEVATE - Arctic Cat Catalyst","description":"\u003cp\u003eWhat happens when you combine the most compact mountain chassis on the market with our #MTNPROVEN ELEVATE geometry? You own the mountain. Over half a decade of experience with Arctic Cat ELEVATE and an extensive development process has produced the ultimate in technical terrain performance. In tight terrain, ELEVATE for Catalyst easily dispenses all challenges, and dominates all challengers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" taller effective height\u003c\/li\u003e\n\u003cli\u003eLighter feel, less fatigue\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptimized geometry to decrease steering effort\u003c\/li\u003e\n\u003cli\u003eIncreased predictability on edge\u003c\/li\u003e\n\u003cli\u003eEasier to initiate and maintain a sidehill\u003c\/li\u003e\n\u003cli\u003eMore playful and precise\u003c\/li\u003e\n\u003cli\u003eLarger snow clearance, less drag\u003c\/li\u003e\n\u003cli\u003eELEVATE-specific limiter strap to provide a balanced lift front to rear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe extended ELEVATE spindle lifts your sled out of the snow for a lighter and more effortless riding feel. This reduction in drag allows your Catalyst M to be more predictable, precise, and less fatiguing. This upgrade is especially noticeable when side-hilling in technical riding situations. Each spindle is CNC machined out of solid 6061-series aluminum, allowing us to create an extremely strong part that is still comparable in weight to the stock spindles. Bring ELEVATE to your Arctic Cat, and experience the best deep-snow handling upgrade on the market. \u003c\/p\u003e\n\u003ch2\u003eA Complete Balanced Handling Package:\u003c\/h2\u003e\n\u003cp\u003eWhat makes the IceAge Elevate kits different?  We take the time to balance the lift of these spindles into a complete handling solution. We include a ELEVATE-specific extended limiter strap to raise the rear of the sled to balance the taller spindle. This reduces steering effort and provides a balanced handling feel.\u003c\/p\u003e\n","brand":"IceAge Performance","offers":[{"title":"Default Title","offer_id":54766823866652,"sku":"15-385","price":795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2291\/3820\/files\/Catalyst_ELEVATE.png?v=1792889871"},{"product_id":"elevate-lightweight-polaris","title":"Polaris - LIGHTWEIGHT ELEVATE","description":"\u003cp\u003eWhat happens when you combine the lightest mountain chassis on the market with our #MTNproven ELEVATE geometry? You own the mountain. Over 2 years of extensive development has produced the ultimate in technical terrain performance. In tight terrain, ELEVATE for Polaris easily dispenses all challenges, and dominates all challengers.\u003c\/p\u003e\n\u003ch3\u003eNEW LIGHTWEIGHT VERSION IS EVEN LIGHTER THAN STOCK SPINDLES, EVEN WITH INCREASED HEIGHT ELEVATE GEOMETRY\u003c\/h3\u003e\n\u003cp\u003eIntroducing the NEW Lightweight ELEVATE spindles for Polaris Matryx and Axys sleds! Forged aluminum construction maintains high strength while weighing even less than stock spindles. Lightweight ELEVATE is equipped with machined pockets that pass all the way through the spindle to shed 21% more weight than the existing design. Experience all the benefits of ELEVATE geometry with none of the weight penalty. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e-Lighter than stock! \u003c\/p\u003e\n\u003cp\u003e-Added 1” of additional ground clearance \u003c\/p\u003e\n\u003cp\u003e-Increased maneuverability \u003c\/p\u003e\n\u003cp\u003e-Higher COG\u003c\/p\u003e\n\u003cp\u003e-More accuracy in technical terrain\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eExisting design will still be available as the “Bomber ELEVATE” for Polaris. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e#MTNproven\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSPINDLES ARE SOLD AS A PAIR\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe extended ELEVATE spindle lifts your sled out of the snow for a lighter and more effortless riding feel. This reduction in drag allows your RMK to be more predictable, precise, and less fatiguing. This upgrade is especially noticeable when sidehilling in technical riding situations. Each spindle is forged and then CNC machined out of solid 6061-series aluminum, allowing us to create an extremely strong part that is still comparable in weight to the stock spindles. Bring ELEVATE to your Polaris, and experience the best deep-snow handling upgrade on the market. \u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eRail Tech:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe designed and refined the ELEVATE Polaris geometry to work specifically with the more aggressive Khaos-profile rail. This rail is an excellent upgrade for anyone with a regular RMK-profile rail, as its geometry shifts the overall weight distribution in the skid further forwards towards the front track shock. This results in a much more dynamic, playful, and lightweight feel from your skid. This foundation of improved rail geometry is what allows the full ELEVATE Polaris geometry to work so effectively.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduced Panel and chassis drag.\u003c\/li\u003e\n\u003cli\u003eLighter and less fatiguing to ride.\u003c\/li\u003e\n\u003cli\u003eMore precise sidehills.\u003c\/li\u003e\n\u003cli\u003eMake 'paneling out' virtually impossible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll kits are compatible with factory Polaris front end parts, and no modifications are required to your bulkhead to achieve the ELEVATE geometry. \u003c\/p\u003e\n\u003cp\u003eSpindles are 1\" taller then the OEM.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eA Complete Balanced Handling Package:\u003c\/h2\u003e\n\u003cp\u003eWhat makes the IceAge Elevate kits different?  We take the time to balance the lift of these spindles into a complete handling solution. For sleds with RMK-length track shocks, this means dropping the front skid arm into the pre-punched (but not always pre-drilled) hole in your tunnel. This geometry change requires an upgrade to khaos-profile rails to avoid dangerous track stabbing. This reduces steering effort and provides a balanced handling feel in between a factory RMK and a Khaos in terms of transfer. See fitment guide below to find your package.\u003c\/p\u003e\n\u003ch3\u003eFitment:\u003c\/h3\u003e\n\u003cp\u003eMatryx Khaos and RMK models 2024+ 155\" or longer: only spindles are required\n\nMatryx Khaos and RMK models 2024+ 146\": spindles, matryx-style khaos rails and 8\" wheels are required.\n\nMatryx\/Axys Khaos models 2020-2023: only spindles are required.\n\nAxys RMK\/ProRMK models 2016-2021: spindles, axys-style khaos profile rails, and 8\" wheels are required. AVAILABLE AS A PACKAGE HERE.\n\nMatryx RMK models 2022-2023 w\/ 2.75\" lug series 8 track: spindles, matryx-style khaos rails and 8\" wheels are required.\n\nMatryx RMK models 2022-2023 w\/ 3\" or 2.6\" lug track: spindles, axys-style khaos rails and 8\" wheels are required. \u003c\/p\u003e","brand":"IceAge Performance","offers":[{"title":"Default Title","offer_id":54766823899420,"sku":"15-365","price":545.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2291\/3820\/files\/LightweightELEVATE_f3da557e-384d-4edf-982a-59c78f9efcf9.png?v=1792889875"},{"product_id":"elevate","title":"Polaris - BOMBER ELEVATE","description":"\u003cp\u003eWhat happens when you combine the lightest mountain chassis on the market with our #MTNproven ELEVATE geometry? You own the mountain. Over 2 years of extensive development has produced the ultimate in technical terrain performance. In tight terrain, ELEVATE for Polaris easily dispenses all challenges, and dominates all challengers.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSPINDLES ARE SOLD AS A PAIR\u003c\/h3\u003e\n\u003cp\u003eBOMBER style spindles are great for those that ride bell to bell and are the hardest on parts! Incredibly strong forged aluminum construction.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iceageperformance.com\/collections\/elevate-polaris\/products\/elevate-lightweight-polaris\"\u003eAlso available in LIGHTWEIGHT construction.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe extended ELEVATE spindle lifts your sled out of the snow for a lighter and more effortless riding feel. This reduction in drag allows your RMK to be more predictable, precise, and less fatiguing. This upgrade is especially noticeable when sidehilling in technical riding situations. Each spindle is forged and then CNC machined out of solid 6061-series aluminum, allowing us to create an extremely strong part that is still comparable in weight to the stock spindles. Bring ELEVATE to your Polaris, and experience the best deep-snow handling upgrade on the market. \u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eRail Tech:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe designed and refined the ELEVATE Polaris geometry to work specifically with the more aggressive Khaos-profile rail. This rail is an excellent upgrade for anyone with a regular RMK-profile rail, as its geometry shifts the overall weight distribution in the skid further forwards towards the front track shock. This results in a much more dynamic, playful, and lightweight feel from your skid. This foundation of improved rail geometry is what allows the full ELEVATE Polaris geometry to work so effectively.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduced Panel and chassis drag.\u003c\/li\u003e\n\u003cli\u003eLighter and less fatiguing to ride.\u003c\/li\u003e\n\u003cli\u003eMore precise sidehills.\u003c\/li\u003e\n\u003cli\u003eMake 'paneling out' virtually impossible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll kits are compatible with factory Polaris front end parts, and no modifications are required to your bulkhead to achieve the ELEVATE geometry. \u003c\/p\u003e\n\u003cp\u003eSpindles are 1\" taller then the OEM.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eA Complete Balanced Handling Package:\u003c\/h2\u003e\n\u003cp\u003eWhat makes the IceAge Elevate kits different?  We take the time to balance the lift of these spindles into a complete handling solution. For sleds with RMK-length track shocks, this means dropping the front skid arm into the pre-punched (but not always pre-drilled) hole in your tunnel. This geometry change requires an upgrade to khaos-profile rails to avoid dangerous track stabbing. This reduces steering effort and provides a balanced handling feel in between a factory RMK and a Khaos in terms of transfer. See fitment guide below to find your package.\u003c\/p\u003e\n\u003ch3\u003eFitment:\u003c\/h3\u003e\n\u003cp\u003eMatryx Khaos and RMK models 2024+ 155\" or longer: only spindles are required\n\nMatryx Khaos and RMK models 2024+ 146\": spindles, matryx-style khaos rails and 8\" wheels are required.\n\nMatryx\/Axys Khaos models 2020-2023: only spindles are required.\n\nAxys RMK\/ProRMK models 2016-2021: spindles, axys-style khaos profile rails, and 8\" wheels are required. AVAILABLE AS A PACKAGE HERE.\n\nMatryx RMK models 2022-2023 w\/ 2.75\" lug series 8 track: spindles, matryx-style khaos rails and 8\" wheels are required.\n\nMatryx RMK models 2022-2023 w\/ 3\" or 2.6\" lug track: spindles, axys-style khaos rails and 8\" wheels are required.\u003c\/p\u003e","brand":"IceAge Performance","offers":[{"title":"Default Title","offer_id":54766823932188,"sku":"15-325","price":445.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2291\/3820\/files\/ELEVATEPolaris_eec9ca0a-c5da-4b92-827c-963f15bf6e5a.png?v=1792889872"}],"url":"https:\/\/momentumpowersportsllc.com\/collections\/iceage-suspension\/yamaha.oembed","provider":"Momentum Powersports LLC","version":"1.0","type":"link"}